Miller Coolmate 3.5 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Miller Coolmate 3.5에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Coolmate 3.5 13 페이지.

Miller Coolmate 3.5 소유자 매뉴얼

11. Routine Maintenance

n = Check
* To be done by Factory Authorized Service Agent
Every
3
Months
Every
6
Months
nlHoses

12. Coolant Maintenance

1
OM-231 313 Page 6
Z = Change
~ = Clean
~Coolant Strainer,
durning heavy service,
clean more frequently.
nl Labels
Δ = Repair
~ Blow out heat exchanger fins.
nCheck coolant level. Top off with
distilled or deionized water if necessary.
ZReplace coolant.
!
Disconnect power
before maintaining.
l = Replace
!
Disconnect input power be-
fore maintaining.
1
Coolant Filter
Unscrew housing to clean filter.
Changing coolant: Drain coolant by
tipping unit to rear, or use suction
pump. Fill with clean water and run
for 10 minutes. Drain and refill with
coolant (see section 8).
.
If replacing hoses, use hoses
compatible with ethylene gly-
col, such as Buna-n, Neo-
prene, or Hypalon. Oxy-acety-
lene hoses are not compatible
with any product containing
ethylene glycol.
Install cover if removed.
Tools Needed:
m30 Torx
804 649-A / Ref. 801 194