Miller D-74 MPa Plus 소유자 매뉴얼 - 페이지 19
{카테고리_이름} Miller D-74 MPa Plus에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller D-74 MPa Plus 44 페이지.
Miller D-74 MPa Plus에 대해서도 마찬가지입니다: 소유자 매뉴얼 (40 페이지)
페이지 인쇄
5-4. 14-Pin Plug Information For Connecting Wire Feeder To Power Source
J
A
K
I
B
L
H
N
C
M
G
D
F
E
*The remaining pins are not used.
5-5. Wire Type, Size, And Optimal Wire Feed Speed Table
Motor Speed
Wire Type
Standard
All
Standard
All
Notes
Pin*
A
24 volts AC with respect to socket G.
B
Contact closure to A completes 24 volts AC contactor control circuit.
G
Circuit common for 24 volts AC circuit.
C
+10 volts DC input from power source to wire feeder with respect to socket D.
D
Remote control circuit common.
E
0 to +10 volts DC output signal from wire feeder to power source with respect to socket D.
H
Voltage feedback; 0 to +10 volts DC, 1 volt per 10 arc volts.
F
Current feedback; 0 to +10 volts DC, 1 volt per 100 amperes.
L
0 to +10 volts DC output signal from wire feeder to power source with respect to socket N.
M
CC/CV select 0 to +10 volts DC.
N
Feeder common.
K
Not used.
Wire Size
.035 To .062 in. (0.9 To 1.57 mm)
5/64 in. (2 mm)
Pin Information
Rated Speed Range (per IEC 60974-5)
55 To 770 ipm (1.4 To 17.8 mpm)
55 To 700 ipm (1.4 To 17.8 mpm)
OM-273243 Page 15