aquanique QDLS14B 매뉴얼 - 페이지 4

{카테고리_이름} aquanique QDLS14B에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aquanique QDLS14B 7 페이지. 14" blue led spillway

8. This unit also can be used in new and existing ponds and is

an ideal way to add color to a waterfall. For existing ponds

with a waterfall simply re-plumb the tube/pipe that discharges

into the existing waterfall and place the lit spillway at the top

of the waterfall insuring that the unit is level. Carefully cover

the housing with natural material for a professional look. For

new ponds and waterfalls, this unit will take the place of a

weir allowing for a much simpler and more natural looking

waterfall installation. Fig. 8

9. Cut the stone that goes on the top of the spillway before building

the next layer of stones. Or use a retaining wall block cap in place

of the cut and add an inch of roofing shingles under the spillway.

Fig. 9

NOTE: The thickness of the weir is approximately 1". You can cut

several pieces of stone to make this fit.

10. Route the power cord of the pump through the hole in the tub and

then route the tubing through the same hole. Fig. 10

11. Remove the front screen from the pump and connect the prefilter to

the front of the pump. Fig. 11

Before returning to your retailer, call our customer service department at

1-888-314-2588, 8 a.m.-6 p.m., EST, Monday-Friday.

Weir

Pump

Fig. 8

Fig. 9

Fig. 10

Fig. 11

Tubing