Miller DIVERSION 180 w/Auto-Line 소유자 매뉴얼 - 페이지 27

{카테고리_이름} Miller DIVERSION 180 w/Auto-Line에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller DIVERSION 180 w/Auto-Line 48 페이지. Wp - 17 torch
Miller DIVERSION 180 w/Auto-Line에 대해서도 마찬가지입니다: 소유자 매뉴얼 (40 페이지)

페이지 인쇄

Miller DIVERSION 180 w/Auto-Line 소유자 매뉴얼

Torch

Torch Operation:

Amperage Adjustment Wheel

Use wheel to adjust amperage from

ten amps to maximum value set on

the machine's Material Thickness/

Amperage Control.

On/Off Switch

Switch has three features that con-

trol the machine in different ways:

 Trigger hold − Push and release

On/Off switch to start welding. Af-

ter switch is released, the Amper-

age Adjustment wheel can be ad-

justed to ramp amperage to de-

sired value for the material being

welded. To end weld sequence,

push and release switch.

 Tacking/Fitting Feature − Press

and hold On/Off switch for more

than one second to start weld out-

put. Release switch to end weld

output. This feature is useful for

tacking and fitting, or in other situ-

ations when weld output is need-

ed for short periods of time.

 Crater-Out Feature − Press and

hold On/Off switch at end of weld

sequence to ramp weld amper-

age down until arc is extin-

guished. Use this feature at the

end of the weld sequence to help

fill the crater that can form in the

weld puddle.

Optional Foot Control

This is a dedicated foot control

which can be purchased as an ac-

cessory.

When the optional foot control is

plugged into the Remote Recep-

tacle (see Section 4-2), the fingertip

control on the torch is disabled.

805 059-A / 805 158-A

OM-246 522 Page 23