ABB CPS6000 빠른 시작 매뉴얼
{카테고리_이름} ABB CPS6000에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB CPS6000 8 페이지.
ABB CPS6000에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지)
페이지 인쇄
QUICK START GUIDE
CPS6000 Power System
For systems with rear access AC terminal box.
The shelf is installed with a minimum gap of 3/4 inch below the system to allow proper airflow. Attach the CPS
shelf to the frame using a minimum of twelve (six on each side) of the 12-24 screws included with the shelf.
Information – Tools Required
•
Wire cutters and strippers
•
Heat shrink gun
•
Torque wrench (0-240 in-lb / 28 Nm)
Document – 850025053
Page 1
© 2023 ABB. All rights reserved.
•
Digital meter, +/- 0.02%
•
Screw Drivers (#1 and #2 Phillips)
•
Cable crimpers
CPS6000_Series II External Distribution_QSG
•
5/16"and 3/8" nut drivers and sockets
Version 2.0