Diamatic BS-110 MKIII 운영 매뉴얼 - 페이지 7

{카테고리_이름} Diamatic BS-110 MKIII에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamatic BS-110 MKIII 16 페이지.

The weight of the BS-110 MKIII is 170kg with the weights. Use preferably appropriate appliances as a

▪

lift or crane. Use the existing lifting points to lift the machine.

Never lift the machine with mounted tool! This sharp tool can be very dangerous!

▪

Before using the machine it is of great importance to inspect the machine every day.

It is not permitted to use the machine if the machine safety is not according the checkpoints below.

Use only extension cables for extending the main cable that are sized and marked in accordance with

▪

the overall power consumption of the machine.

Electrical cables must be rolled entirely off of the reels.

▪

Any damage to electric cables is not permitted.

▪

Use an electrical power supply connection with earth connection.

▪

Check if:

The safety functions and operating functions work correct.

▪

There are not any loose nuts or bolts.

▪

There are no damages on the electrical components.

▪

The drive wheels are engaged with quick release pins. Remove

them for easy transport by hand. Line up wheel hub hole and

wheel hole to insert pin as following: Push the machine side wards

so, that the drive wheel lift up and rotate it to line up the holes.

Never load or unload machine on a ramp or incline when wheels

are in the disengage mode. Failure to do so could cause machine

runaway, damage to machine, damage to property or cause

serious injury.

4. Initial operation