Burkert 2509 운영 지침

{카테고리_이름} Burkert 2509에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Burkert 2509 2 페이지. Cable plug – conduit connection, ur approved
Burkert 2509에 대해서도 마찬가지입니다: 운영 지침 (2 페이지), 운영 지침 (2 페이지), 사용 설명서 (13 페이지)

페이지 인쇄
Type 2509
Cable plug
Conduit Connection, UR approved
Operating Instructions
Address
Germany / Deutschland / Allemagne
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10-91 111
Fax + 49 (0) 7940 - 10-91 448
International: www.burkert.com
Manuals and data sheets on the Internet : www.burkert.com
© Bürkert Werke GmbH & Co. KG, 2018
Operating Instructions 1803/00_EN-EN_00810635 / Original DE
SymbOlS
→
designates a procedure which you must carry out.
Warning of serious or fatal injuries:
Danger!
In case of imminent danger.
Warning!
In case of potential danger.
1
SySTem
deScripTion
1.1
General description
The cable plug Type 2509 with UL certification consists
of a polyamide housing without integrated electronics.
The connector is in accordance with DIN EN 175301-803
(previously DIN 43650 Form A).
1.2
Functions
The cable plug Type 2509 is used for joining conduit con-
nections to solenoid coils.
english
2
Technical daTa
2.1
conformity
The cable plug Type 2509 conforms to the EU directives
according to the EU Declaration of Conformity (where
applicable).
2.2
Standards
The applied standards, which are used to demonstrate
conformity with the EU Directives, are listed in the EU type
test certificate and/or the EU Declaration of Conformity
(where applicable).
2.3
operating conditions
Certification UR file no. E238288
Self-Declared Operating Conditions
Operating temperature
–40 °C...+90 °C
(–40 °F...+194 °F)
Degree of protection
NEMA 4X (IP65)
2.4
mechanical data
Dimensions
see data sheet
(approx. 33 x 33 x 59 mm)
Materials
Housing
Polyamide
Seal
NBR
Contacts
Copper alloy, silvered
Cable outlet
Contact insert can be rotated
by
4 x 90° after removal
Poles
2-pole + protective conductor /
3-pole + protective conductor
Electrical connection
3 or 4 terminals in the contact
insert Wire diameter AWG18
Thread of the
conduit screw
connection
1/2 " NPT
Approved conduit connections
• for use with flexible conduit only
2.5
electrical data
Power supply
0 ... 250 V AC/DC
Max. electrical current
6 A
2.6
pin assignment
Details of the pin assignment can be found in the data
sheet for the corresponding valve.