Miller OM-262 659C 안전 매뉴얼 - 페이지 43

{카테고리_이름} Miller OM-262 659C에 대한 안전 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller OM-262 659C 46 페이지.

(l)

Any violation of this rule shall be subject to enforcement in accor-

dance with the provisions of §§27-4020 and 27-4254 of the Admin-

istrative Code.

(m) City-Wide Permit shall not include the storage and use of oxygen

and combustible gases during the course of construction, alteration

or demolition work. A separate permit shall be required for such

storage and use.

§38-02 Operators of Heating Torches Used in the Manufacture of

Jewelry.

(a) Operators of heating torches used in the manufacture of jewelry

shall not be required to obtain individual Certificates of Fitness for

the operation of such torches.

(b) A Certificate of Fitness shall be required of a person in such occu-

pancies, who shall be responsible for the following:

(1) Regulation of pressure and flow of oxygen and city gas to the

individual operators of heating torches:

(2) Supervision of the individual heating torch operation.

§38-03 Fire Guards During Torch Operations. A person holding a Cer-

tificate of Fitness issued by the Fire Department shall be re-

quired to act in the capacity of fire guard during torch opera-

tions in course of construction, alteration, or demolition work;

also, during temporary or emergency torch operations. Such

persons shall provide required fire extinguishing equipment at

torch operation locations; guard against fire in exposed areas,

and make a complete inspection of exposed areas for possible

fire.

OM-262 659 Page 41