3B Medical CPAPX CHANGE Siesta 사용자 설명서
{카테고리_이름} 3B Medical CPAPX CHANGE Siesta에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3B Medical CPAPX CHANGE Siesta 2 페이지. Nasal mask
페이지 인쇄I'
1
leMc
TM
1
Siesta Nasal Mask
User Manual
Components of the Mask
Soft sleeves�
'
�
Clips
Cushion assembly
Components of the Siesta Nasal Mask
Siesta Nasal Mask
Thank you for choosing 3B Medical's Siesta Nasal Mask.
The Siesta Nasal Mask is designed to minimize contact with your face,
thus ensuring that you feel comfortable during therapy. This user manual
provides you with the information you need for the correct use of your
mask.
The Mask is not made with natural rubber latex.
Intended Use
The Siesta Nasal Mask channels airflow non-invasively to the patient
from a positive airway pressure device such as a continuous positive
airway pressure (CPAP) or bi-level system.
The Siesta Nasal Mask is:
•
To be used by adult patients (> 66 lb / 30 kg) for whom positive
airway pressure therapy has been prescribed.
•
Intended for single-patient reuse.
CAUTION: In the US, Federal law restricts the sale of this device by or
on the order of a physician.
Before Using the Mask
.&_
WARNINGS
•
The vent holes must be kept clear.
•
This mask should only be used with CPAP or bilevel devices
recommended by a physician or respiratory therapist.
•
The mask should not be used unless the device is turned on. Once
the mask is fitted, ensure the device is blowing air.
Explanation: CPAP and bilevel devices are intended to be used
with special masks (or connectors) which have vent holes to allow
continuous flow of air out of the mask. When the device is turned on
and functioning properly, new air from the device flushes the
exhaled air out through the mask vent holes. However, when the
device is not operating, insufficient fresh air will be provided through
I
Frame
the mask, and the exhaled air may be rebreathed. Rebreathing of
exhaled air for longer than several minutes can, in some
circumstances, lead to suffocation. This applies to most models of
CPAP or bilevel devices.
•
This mask is made with silicone parts. Please do not use if patient
has silicone allergy or sensativity.
•
This mask should not be used on patients who are uncooperative,
obtunded, unresponsive, or unable to remove the mask.
•
Follow all precautions when using supplemental oxygen.
•
Oxygen flow must be turned off when the CPAP or bilevel device is
not operating, so that unused oxygen does not accumulate within
the device enclosure and create a risk of fire.
•
Oxygen supports combustion. Oxygen must not be used while
smoking or in the presence of an open flame. Only use oxygen in
well ventilated rooms.
•
At a fixed flow rate of supplemental oxygen flow, the inhaled oxygen
concentration varies, depending on the pressure settings, patient
breathing pattern, mask, point of application and leak rate.
•
The technical specifications of the mask are provided for your
clinician to check if it is compatible with the flow generator. If it is
used beyond technical specifications or used with incompatible
devices, the seal and comfort of the mask may not be effective,
optimum therapy may not be achieved, and leak, or variation in the
rate of leak, may affect the function of the flow generator.
•
Stop using the Siesta Nasal Mask and consult your physician or
sleep therapist, if you have ANY adverse reaction to the use of the
mask.
•
Refer to your CPAP or bilevel device manual for details on settings
and operational information.
•
Remove all packaging before using the mask.
Fitting the Mask
2
Attach the headgear
Hold the mask over your
straps by threading them
nose and pull the
through the gaps of
headgear over your head.
forehead frame and clips.
4
5
Adjust the upper headgear
Adjust the lower headgear
straps evenly until they are
straps evenly until they are
comfortable and fsecure,
comfortable and fsecure,
and reattach the mask.
and reattach the mask.
Disassembling the Mask
Undo and remove the upper headgear
straps out of the slots on the Frame.
3
Remove the Short tube from the Frame
assembly.
Cleaning the Mask
Notes:
•
The mask and headgear can only be cleaned through hand washing
or placed in the Lumin device
•
The headgear may be washed without removing the clips.
•
When washing the mask, the Elbow and the Frame cannot be
disassembled from the Frame assembly.
3
Bringing the lower
headgear straps below
your ears, connect the
clips to the Frame
assembly.
6
Mask is worn as shown.
2
Remove the Cushion assembly from
the Frame assembly.