Burkert MS05 매뉴얼 - 페이지 2
{카테고리_이름} Burkert MS05에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Burkert MS05 4 페이지. Turbidity sensor cube
페이지 인쇄
MS05
Environment
Ambient temperature
Relative humidity
Height above sea level
Electrical data
Operating voltage
Power consumption
Internal communication
External communication by sta-
tus LED
Standards, directives and certifications
Protection class
(acc. to IEC/
EN 60529)
Standard and directives
Design and principle of operation
The sensor cube gets the sample water through the fluidic backplane, in which it is plugged in. The measurement is based on the detection of
scattered light in an arrangement of 90° to the incident beam. The sample is flowing through a cuvette in glass or in glass/PET.
Locked position
Unlocked position
Sensor cube Status LED
Push-button with
measured process variable
Lever to
lock / unlock the product.
+3...+40 °C
(+37...+104 °F)
< 90 %, without condensation
max. 2000 m
24 V DC through the backplane of the system Type
8095 via büS
0.8 VA
through büS
(Bürkert bus)
According to NAMUR NE 107
IP65, when plugged in the fluidic backplane
IP20, as standalone product
The applied standards, which verify conformity with
the EU Directives, can be found on the EU Type Ex-
amination Certificate and/or the EU Declaration of
conformity
(if applicable)
Fluid connections
Housing for the cuvette
Slot
micro-SIM card
Electrical in-
terface
Adaptation pins
Pin
2/4