Miller Welding 안전 퀵 매뉴얼 - 페이지 7

{카테고리_이름} Miller Welding에 대한 안전 퀵 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Welding 16 페이지. For arc welding and cutting the safe way
Miller Welding에 대해서도 마찬가지입니다: 소유자 매뉴얼 (33 페이지)

페이지 인쇄
Miller Welding 안전 퀵 매뉴얼
Safety Quick-Guide
Use approved engine exhaust spark arrestor in required areas — see applicable codes.
Keep exhaust and exhaust pipes away from flammables.
Do not locate unit near flammables.

4. Plasma Arc Cutting Hazards

Exhaust sparks can cause fire.
Cutting sparks can cause fire or explosion.
Do not cut near flammable material. Move flammables at least 35
feet (11 meters) away or protect them with flame-proof covers (see
NFPA 51B listed in Section 7).
Cutting sparks can cause fires. Have a fire extinguisher nearby,
and have a trained fire watch ready to use it.
Do not cut on drums, tanks, or any closed containers unless a
qualified person has tested it and declared it or prepared it to be
safe (see AWS F4.1 listed in Section 7).
Plasma arc can cause injury and burns.
Turn off power before disassembling torch.
Do not grip material near cutting path.
Do not touch hot parts bare-handed.
Page 6