Burkert 2103 Series 추가 지침 - 페이지 9

{카테고리_이름} Burkert 2103 Series에 대한 추가 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Burkert 2103 Series 12 페이지. Remote-positioner, installation on process valves with internal air flow
Burkert 2103 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (19 페이지)

페이지 인쇄
Burkert 2103 Series 추가 지침
Type 8635, Remote-Positioner
→ When tightening the cable gland, note the position of the
plug-in connection. See marked area in the following "Fig. 12".
NOTE!
The cable in the housing must have a minimum length, but
must not be under tension.
Fig. 12: Position of the electrical plug-in connection for position con-
troller and position sensor
→ Attach body casing and screw in clockwise all the way.

Start-up

Plug-in
connection must
be within the
marked area.
4
START-UP
WARNING!
Risk of injury due to incorrect operation.
▶ Prior to start-up, make sure operating personnel are familiar
with the operating instructions and have understood them.
▶ The device or system should be started up by fully trained
personnel only.
Risk of injury due to unintentional switching on of the plant
and uncontrolled start-up.
▶ Secure system against unintentional activation.
▶ Following assembly, ensure a controlled restart.
→ Connect compressed air to the positioner.
→ Connect positioner pneumatically to the position sensor.
→ Switch on the operating voltage of Type 8635.
→ Run the X.TUNE function.
english
9