Burkert 2301 Series 추가 지침 - 페이지 4
{카테고리_이름} Burkert 2301 Series에 대한 추가 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Burkert 2301 Series 12 페이지. 2/2-way globe control valve
Burkert 2301 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (19 페이지)
페이지 인쇄
3
ASSEMBLING THE POSITION
SENSOR
DANGER!
Risk of injury from high pressure and discharge of medium.
▶ Before working on the device or system, switch off the pres-
sure. Vent or drain lines.
Risk of injury from electric shock.
▶ Before working on the device or system, switch off the power
supply. Secure against reactivation.
WARNING!
Risk of injury due to incorrect assembly.
▶ Assembly may be carried out only by authorized specialist
personnel and using the appropriate tools.
Risk of injury due to unintentional switching on of the plant
and uncontrolled start-up.
▶ Secure system against unintentional activation.
▶ Following assembly, ensure a controlled restart.
CAUTION!
Risk of injury due to heavy device.
A heavy device can fall down and cause injury during transport
or assembly work.
▶ Do not transport, install or remove a heavy device without the
aid of a second person.
▶ Use suitable auxiliary tools.
4
english
Type 8635, Remote-Positioner
Assembling the position sensor
3.1
Installing attachment kit on the
actuator
NOTE!
To install process valves with welded body, follow the
installation instructions in the operating instructions for the
process valve.
1. Assembling switch spindle
Transparent cap
Pilot air ports
(push-in connectors with
collets or threaded bushings)
Actuator
Fig. 3:
Assembling switch spindle
→ Unscrew the transparent cap on the actuator and the position
indicator (yellow cap) on the spindle extension (if present).
→ For version with push-in connector, remove the collets (white
nozzles) from both pilot air ports (if present).