Miller 24A 소유자 매뉴얼 - 페이지 16

{카테고리_이름} Miller 24A에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller 24A 40 페이지. Wire feeder

4-1. Serial Number And Rating Label Location

The serial number and rating information for this product is located on the rear panel. Use rating label to determine input power requirements and/or

rated output. For future reference, write serial number in space provided on back cover of this manual.

4-2. Unit Specifications

Type of Input

Welding Power

Power

Source Type

24 Volts AC Single

Constant Voltage

Phase

(CV) DC With

7 Amperes 50/60

14-Pin And

Contactor Control

4-3. Environmental Specifications

A. IP Rating

This equipment is designed for indoor use and is not intended to be used or stored outside.

B. Temperature Specifications

Operating Temperature Range

14 to 104°F (−10 to 40°C)

C. Information On Electromagnetic Compatibility (EMC)

This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−

voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-

ducted as well as radiated disturbances.

Notes

OM-193472 Page 12

SECTION 4 − SPECIFICATIONS

Wire Feed

Speed Range

75 to 750 ipm

(1.9 To 19 mpm)

Max Spool Weight:

Wire

Welding

Diameter

Circuit Rating

Range

.023 To 5/64 in.

(0.6 To 2 mm)

100 Volts,

500 Amperes,

Max Spool

100%

Capacity:

Duty Cycle

18 in. (457 mm)

60 lb (27 kg)

IP Rating

IP21S

Storage Temperature Range

−4 to 131°F (−20 to 55°C)

Overall

Weight

Dimensions

Length: 23-1/2 in.

(597 mm)

Width: 10-3/4 in.

35 lb (15.9 kg)

(273 mm)

Height: 11 in.

(279 mm)

IP21S 2014−06

Temp_2016- 07

ce-emc 3 2014-07