Miller 301523 소유자 매뉴얼 - 페이지 5
{카테고리_이름} Miller 301523에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller 301523 8 페이지. Deltaweld 350/500 running gear, migrunner kit
페이지 인쇄
5.
Attaching Dual Feeder To Swivel Bracket
2
3
4
6
Tools Needed:
3/8, 5/16 in.
5
1
1
Screw - 10 x .375
2
Cover Plate
3
Dual Wire Feeder
4
Swivel Base
5
Screw - 1/4 in. X 1-1/2 in.
6
Casters
Lock casters to prevent cart from moving.
Remove wire feeder and wire feeder Own-
er's Manual from box. Discard packaging.
Remove the two 10 x .375 screws attaching
the cover plate to base of feeder. Discard
the screws and cover plate.
Obtain four 1/4 in. X 1-1/2 in. screws from
hardware kit.
Align larger hole in wire feeder base with
swivel post on top of cart. Lower feeder so
the swivel post passes thru the hole in
base.
Align four holes in wire feeder base and in-
stall four 1/4 in. X 1-1/2 in. Screws. Tighten
to 75 in lb.
OM-287389 Page 5
287390-A