Miller Bernand PipeWorx MIG Gun 운영 매뉴얼 - 페이지 3
{카테고리_이름} Miller Bernand PipeWorx MIG Gun에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Bernand PipeWorx MIG Gun 21 페이지.
페이지 인쇄
ARC RAYS can burn eyes and skin.
Arc rays from the welding process produce intense
visible and invisible (ultraviolet and infrared) rays
that can burn eyes and skin. Sparks fly off from the
weld.
Wear an approved welding helmet fitted with a proper shade
l
of filter lenses to protect your face and eyes from arc rays and
sparks when welding or watching (see ANSI Z49.1 and Z87.1
listed in Principal Safety Standards).
Wear approved safety glasses with side shields under your
l
helmet.
Use protective screens or barriers to protect others from
l
flash, glare and sparks; warn others not to watch the arc.
Wear body protection made from durable, flame-resistant
l
material (leather, heavy cotton, wool). Body protection
includes oil-free clothing such as leather gloves, heavy shirt,
cuffless trousers, high shoes, and a cap.
NOISE can damage hearing.
Noise from some processes or equipment can
damage hearing.
Check for noise level limits exceeding those
l
specified by OSHA.
Use approved ear plugs or ear muffs if noise level is high.
l
Warn others nearby about noise hazard.
l
WELDING WIRE can injure.
Keep hands and body away from gun tip when
l
trigger is pressed.
READ INSTRUCTIONS.
Read and follow all labels and the Owner's
l
Manual carefully before installing, operating,
or servicing unit. Read the safety information
at the beginning of the Manual and in each section.
Use only genuine replacement parts from the manufacturer.
l
Perform installation, maintenance, and service according to
l
the Owner's Manuals, industry standards, and national, state,
and local codes.
3