Miller Classic Clearlight 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Miller Classic Clearlight에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Classic Clearlight 44 페이지. Auto-darkening helmets

SECTION 1 – SAFETY PRECAUTIONS –

Protect yourself and others from injury—read, follow, and save these important safety

precautions and operating instructions.

1-1.

DANGER! – Indicates a hazardous situation which, if not avoided, will result in death

or serious injury. The possible hazards are shown in the adjoining symbols or ex-

plained in the text.

Indicates a hazardous situation which, if not avoided, could result in death or seri-

ous injury. The possible hazards are shown in the adjoining symbols or explained in

the text.

NOTICE – Indicates statements not related to personal injury.

�

Indicates special instructions.

This group of symbols means Warning! Watch Out! ELECTRIC SHOCK, MOVING PARTS, and

HOT PARTS hazards. Consult symbols and related instructions below for necessary actions to

avoid these hazards.

1-2.

The symbols shown below are used throughout this manual to call attention to and

identify possible hazards. When you see the symbol, watch out, and follow the related

instructions to avoid the hazard. The safety information given below is only a sum-

mary of the more complete safety information found in the Principal Safety Standards

listed in Section 1-5. Read and follow all Safety Standards.

Only qualified persons should install, operate, maintain, and repair this equipment. A

qualified person is defined as one who, by possession of a recognized degree, certifi-

cate, or professional standing, or who by extensive knowledge, training and experi-

ence, has successfully demonstrated the ability to solve or resolve problems relating

to the subject matter, the work, or the project and has received safety training to rec-

ognize and avoid the hazards involved.

During operation, keep everybody, especially children, away.

ARC RAYS can burn eyes and skin.

Arc rays from the welding process produce intense visible and invisible (ultra-

violet and infrared) rays that can burn eyes and skin. Sparks fly off from the

weld.

� Wear a welding helmet fitted with a proper shade of filter to protect your face

and eyes when welding or watching (see ANSI Z49.1 and Z87.1 listed in Principal Safety

Standards). Refer to Lens Shade Selection table in Section 1-4.

� Wear approved safety glasses with side shields under your helmet.

� Use protective screens or barriers to protect others from flash, glare, and sparks; warn others

not to watch the arc.

� Wear body protection made from durable, flame-resistant material (leather, heavy cotton,

wool). Body protection includes oil-free clothing such as leather gloves, heavy shirt, cuffless

trousers, high shoes, and a cap.

OM-288583 Page 1

READ BEFORE USING