Miller T94i Series 매뉴얼 - 페이지 15

{카테고리_이름} Miller T94i Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller T94i Series 32 페이지. Auto-darkening helmets
Miller T94i Series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (40 페이지)

페이지 인쇄

4-6. Lens Delay Control

Mode Button

Adjust Button

Increase (+) And De-

crease (-) Buttons

Select Delay by pressing the

Adjust button. Use the + / −

buttons to adjust the time for

the lens to switch to the clear

state after welding or cutting.

The delay is particularly use-

ful in eliminating bright

after-rays present in higher

amperage

applications

where the molten puddle re-

mains bright momentarily

after welding. Use the + / -

buttons to adjust delay from

0 to 10 (0.1 to 1.0 second).

The delay ranges for each

mode are as follows:

Weld, Cut, X-Modes − 0 −

Grind Mode − No delay ad-

justment

There is no lens delay

adjustment in the Grind

mode.

Lens Delay Adjustment

Procedure

Press Mode (On/Off)

button to turn lens On.

Helmet control display

will appear.

Press Mode button to

select desired function:

Weld, Cut, or X-Mode.

Use Adjust button to se-

lect delay, and then

adjust to desired delay

using + / − buttons.

Begin welding or contin-

with

adjustments.

OM-255503 Page 13

260482-4

other

lens