Miller T94i XL Series 소유자 매뉴얼 - 페이지 12
{카테고리_이름} Miller T94i XL Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller T94i XL Series 40 페이지. Auto-darkening helmets
페이지 인쇄
SECTION 4 – SPECIFICATIONS
Specification
Viewing Field
Reaction Time
Available
Shades
All shades pro-
vide continuous
UV and IR
protection.
Sensitivity
Control
Delay Control
Automatic
Power Off
Low Battery
Light
Power Supply
Sensors
Operating
Temperature
Storage
Temperature
Total Weight
Standards
Warranty
OM-255503 Page 10
T94, T94i
3.81 x 2.62 in. (97 x 60 mm)
0.0000400 sec (1/25,000)
Weld Mode: Darkened State: No 8–
No. 13, Light State: No. 3
Cut Mode: Darkened State: No 5–
No. 8, Light State: No. 3
Grind Mode: Light State: No. 3
X-Mode: Darkened State: No 8–No.
13, Light State: No. 3
Adjustable for varying ambient light and welding arc
Slows lens dark-to-light state between 0.1 and 1.0 seconds
Shuts lens off 45 minutes after last arc is struck
Red LED illuminates to indicate 2–3 days remaining battery life
Panasonic CR2450 Lithium Battery
(Miller Part. No. 217043)
Qty 1
�
When stored in extremely cold temperatures, warm helmet to ambient
temperature before welding.
�
When stored in extremely cold temperatures, warm helmet to ambient
temperature before welding.
T94: 21 oz (595 g)
T94i: 25.7 oz (729 g)
Four years from date of purchase (see Section 13)
Weld Mode: Darkened State: No 8–
No. 14, Light State: No. 3
Cut Mode: Darkened State: No 5–
No. 8, Light State: No. 3
Grind Mode: Light State: No. 3
X-Mode: Darkened State: No 8–No.
14, Light State: No. 3
Panasonic CR2450 Lithium Battery
Independent/Redundant (Four)
14°F to 131°F (–10°C to 55°C)
–4°F to 158°F (–20°C to 70°C)
Meets ANSI Z87.1+, CSA Z94.3
T94i XL
4.41 x 2.95 in. (112 x 75 mm)
0.0000400 sec (1/25,000)
(Miller Part. No. 217043)
Qty 2
T94i XL: 28 oz (795 g)