Diamir Experience 06/07 서비스 매뉴얼 - 페이지 12
{카테고리_이름} Diamir Experience 06/07에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamir Experience 06/07 20 페이지. Eagle experience freeride pro
페이지 인쇄
10 DIAMIr
Service Manual for specialist dealers
5.3
Adjustment of the binding to the person
5.3.1 Determine the DIN value (according to ISO 11088:2006)
the DIN value has to be set according to the personal data of the skier in order to get the correct lateral and forward release, therefore
body weight, height, age, boot sole length and type of skier (classification see below) has to be used correctly.
classification type of skier
Skier type 1: Cautious skiing on smooth slopes of gentle to moderate pitch. this type also applies to entry level skiers uncertain of
their classification. Skiers who designate themselves as type 1 receive lower than average release/retention settings. this corresponds
to an increased risk of inadvertent binding release, in order to gain increase capacity for release in the event of a fall.
Skier type 2: Skier not classified in type 1 or 3.
Skier type 3: Fast, aggressive skiing on slopes of moderate to steep pitch. Skiers who designate themselves as type 3 receive higher
than average release/retention settings. this corresponds to decreased capacity for release in the event of fall, in order to gain a
decreased risk of inadvertent binding release.
Determine the code of the skier according to table 2:
1. Find the line of the skier's weight in the first column and the skier's height in the second column. If these parameters are in the
same line, choose the skier code of this line. If the parameters of weight and height are in different lines, choose the skier code on
the line above.
2. this skier code corresponds to type 1 skiers. For type 2 skiers, go down one line and for type 3 skiers go down two lines.
3. For skiers older than 50 years go up one line.
Determine Din value according to table 3:
1. Choose the according boot sole length in mm.
2. the intersection between «skier code»/«length of the boot sole» indicates the settings.
3. If the box of the intersection is empty, choose the value of the next box to the right on the same line.
Example determination of the Din value
Parameter skier
Body weight:
77 kg
Height:
182 cm
type of skier:
2
Age:
28 years
Boot sole length:
285 mm
table 2
Parameter skier
Body weight
31–35 kg / 67–78 lbs
36–41 kg / 79–91 lbs
42–48 kg / 92–107 lbs
49–57 kg / 108–125 lbs
149–157 cm / 4'1''–5'1''
58–66 kg / 126–147 lbs
158–166 cm / 5'2''–5'5''
67–78 kg / 148–174 lbs
167–178 cm / 5'6''–5'10''
79–94 kg / 175–209 lbs
179–194 cm / 5'11''–6'4''
≥ 95 kg / 210 lbs
Determination of the Din value
According to table 2 → Code K
According to table 2 → Code L
the upper line above is determinant → Code K
For type 2 skiers, go down one line → Code L
Younger than 50 years → Stay on Code L
table 3: take DIN value of the intersection Code L and boot sole length (column 3). → DIN value 7
Height
Code skier
F
G
< 149 cm / 4'1''
H
I
J
K
L
≥ 195 cm /6'5''
M
N
O
P
table 3
Boot sole length
Din value
2
3
4
251 to
271 to
291 to
270 mm
290 mm
310 mm
2.5
2.25
2
3
2.75
2.5
3.5
3
3
4.5
4
3.5
5.5
5
4.5
6.5
6
5.5
7.5
7
6.5
8.5
8
10
9.5
11.5
11
table 4
5
6
6
311 to
331 to
≥
330 mm
350 mm
351 mm
1.75
1.75
2.25
2
2.75
2.5
3.5
3
4
3.5
3
5
4.5
4
6
5.5
5
7
6.5
6
8.5
8
7.5
10
9.5
9
10.5
test parameter
torsion
Forward fall
23 Nm
87 Nm
27 Nm
102 Nm
31 Nm
120 Nm
37 Nm
141 Nm
43 Nm
165 Nm
50 Nm
194 Nm
58 Nm
229 Nm
67 Nm
271 Nm
78 Nm
320 Nm
91 Nm
380 Nm
105 Nm
452 Nm
www.diamir.com