Miller 1080 Arrow fx 5 운영자 매뉴얼 - 페이지 10

{카테고리_이름} Miller 1080 Arrow fx 5에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller 1080 Arrow fx 5 16 페이지. Fluid head

Operating Instructions

6. Pan-Tilt Drag Control.

The Arrow

fluid head offers 7 selectable positions of fluid

drag + zero setting in the pan and tilt (5 for AFX 3). The

settings are equally stepped from light drag in position 1 up

to heavy drag in position 7, the drag plates are completely

disengaged in position zero.

• Do not pan or tilt the fluid head whilst adjusting PAN or

TILT DRAG CONTROL or whilst the PAN & TILT DRAG

CONTROL is between settings.

• The drag setting can be changed at any tilt or pan angle.

The Arrow

fluid head offers high capacity caliper disc

brake system to hold the fluid head in a fixed pan and/or tilt

position. Camera position will not change when applying or

releasing the pan-tilt locks.

• Do not pan or tilt the fluid head whilst the PAN or the TILT

LOCK is partially applied.

The Arrow

fluid head offers illumination of the PAN

& TILT DRAG CONTROL settings, BUBBLE LEVEL

and PAN & TILT INDICATOR when the low ambient

light conditions exist. Illumination can be achieved by

pressing the ILLUMINATION BUTTON once. The light will

switch off after 10 seconds.

Tilt Drag Setting

Illumination Button

Mounting Points

Tilt Drag Knob

Counter Balance Selector

Pan Drag Setting

Pan Drag Knob

Bubble Level

Fig. 11