Burkert 8791 추가 지침 - 페이지 4
{카테고리_이름} Burkert 8791에 대한 추가 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Burkert 8791 12 페이지. External position feedback option with inductive proximity
switch
Burkert 8791에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (16 페이지), 조립 지침 매뉴얼 (16 페이지)
페이지 인쇄
1
ADDITIONAL INSTRUCTIONS
The additional instructions contain safety instructions and infor-
mation for the use of the device in the potentially explosive
atmosphere.
Keep these instructions in a location which is easily accessible
to every user and make these instructions available to every new
owner of the device.
Important safety information.
Read these instructions carefully and thoroughly. Study in par-
ticular the chapters entitled Particular safety instructions and
Authorized use.
▶ The additional instructions must be read and understood.
Further information on the device can be found in the operating
instructions of the corresponding device.
The operating instructions can be found on the Internet at:
www.burkert.com
1.1
Definitions of terms
The term "device" used in these instructions always stands for the
position controllers Type 8791 and Type 8792 and for the process
controller Type 8793.
4
english
2
SYMBOLS
The following symbols are used in these instructions.
DANGER!
Warns of an immediate danger.
▶ Failure to observe the warning will result in a fatal or serious
injury.
WARNING!
Warns of a potentially dangerous situation.
▶ Failure to observe the warning may result in a serious or fatal
injury.
CAUTION!
Warns of a possible danger.
▶ Failure to observe this warning may result in a moderate or
minor injury.
NOTE!
Warns of damage to property.
Important tips and recommendations.
Refers to information in these operating instructions or in
other documentation.
▶ designates instructions for risk prevention.
→ designates a procedure which you must carry out.
BVS 16 ATEX E 118 X
Additional instructions