Miller arrow 25 운영자 매뉴얼 - 페이지 9
{카테고리_이름} Miller arrow 25에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller arrow 25 13 페이지. Fluid head
페이지 인쇄
Operating Instructions
4. Pan / Tilt Drag Control.
The Arrow 25 Fluid Head offers 5 selectable positions of
fluid drag + zero setting in the Pan and Tilt. The settings are
equally stepped from light drag in position 1 up to heavy drag
in position 5, the drag plates are completely disengaged in
position zero.
Do not Pan or Tilt the Fluid Head whilst adjusting PAN or TILT
◗
DRAG CONTROL or whilst the PAN & TIL DRAG CONTROL
is between settings.
The drag setting can be changed at any tilt or pan angle.
◗
5. Pan/Tilt Lock Control.
The Arrow 25 Fluid Head offers high capacity calliper disc
brake system to hold the Fluid Head in a fixed pan and/or tilt
position. Camera position will not change when applying or
releasing the Pan/Tilt locks.
Do not pan or tilt the Fluid Head whilst the PAN or the TILT
◗
LOCK is partially applied.
6. Illumination.
The Arrow 25 Fluid Head offers illumination of the PAN &
TILT DRAG CONTROL settings, BUBBLE LEVEL and PAN &
TILT INDICATOR when the low ambient light conditions exist.
Illumination can be achieved by pressing the ILLUMINATION
BUTTON once. The light will switch off after 10 seconds.
Tilt Drag Setting
Illumination Button
Fig. 7
Tilt Drag Knob
Tilt Indicator
8
Counter Balance Selector
Pan Drag Setting
Pan Indicator
Bubble Level
Pan Drag Knob