Miller skyline 90 운영자 매뉴얼 - 페이지 5

{카테고리_이름} Miller skyline 90에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller skyline 90 13 페이지. Fluid head

Please use this manual to familiarise yourself with the

operation of the Skyline 90 Fluid Head and observe these

instructions to prevent any damage to your equipment.

Ensure that all equipment is operating correctly and free from

defects and damage, also please ensure that the tripod is

steady, secure and that the bowl is approximately horizontal

when attaching the camera. The operator is responsible for

the safe operation of this piece of equipment.

Safety Instructions

 Do not exceed the maximum payload capacity of the Fluid

Head.

 Do not leave the camera unattended on the Fluid Head.

 Do not release the SLIDING PLATE LOCK whilst the camera

is at an angle.

 Do not adjust the tripod whilst the camera is attached to the

Fluid Head.

 Ensure PAN HANDLE CLAMP and MITCHELL CASTLE NUT

are securely tightened.

 Apply TILT SAFETY LOCK when adding/removing equipment

from the camera or when attaching/removing the camera

from the Fluid Head.

 Hold camera securely whilst changing Counterbalance, Pan

Drag or Tilt Drag settings.

 Hold the camera securely whilst using the WEDGE PLATE

 Remove camera whilst tightening / loosening the MITCHELL

CASTLE NUT.