Burkert 8792 추가 지침 - 페이지 7

{카테고리_이름} Burkert 8792에 대한 추가 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Burkert 8792 12 페이지. Position controller and process controller with ii 3g ex ec ic iic t4 gc / ii 3d ex tc iiic t135c dc approval
Burkert 8792에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (16 페이지), 조립 지침 매뉴얼 (16 페이지)

페이지 인쇄

BVS 16 ATEX E 118 X

Instructions on operation in the potentially explosive atmosphere

INSTRUCTIONS ON OPERATION

IN THE POTENTIALLY

EXPLOSIVE ATMOSPHERE

When using the device in an potentially explosive atmosphere,

observe the following:

5.1

Media in the potentially explosive

atmosphere

If explosive media are used, this can result in additional

explosion risks.

5.2

Actuators/valves in the potentially

explosive atmosphere

Use in an explosive atmosphere may be restricted by the

actuators/valves. Observe the operating instructions of the

actuators/valves.

5.3

Cleaning in the potentially

explosive atmosphere

DANGER!

Risk of explosion caused by electrostatic charge.

▶ Clean the device surface by gently wiping it with a damp or

anti-static cloth only.

Check that cleaning agents are approved for use in

explosive atmospheres.

5.4

Adhesive labels for the potentially

explosive atmosphere

Fig. 1:

Arrangement of the adhesive labels for the potentially explosive

atmosphere, additional adhesive label

english

WARNING

1. DO NOT CONNECT OR

DISCONNECT WHEN ENERGIZED

2. DO NOT OPEN WHEN

ENERGIZED

3. POTENTIAL ELECTROSTATIC

see

CHARGING HAZARD -

instructions

Additional adhesive

label

Type label