Miller Digital Elite 매뉴얼 - 페이지 20

{카테고리_이름} Miller Digital Elite에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Digital Elite 32 페이지. Auto-darkening helmets
Miller Digital Elite에 대해서도 마찬가지입니다: 매뉴얼 (28 페이지)

페이지 인쇄

5-5. Replacing The Lens Covers On Digital Elite Standard Helmets

Be sure flat side

of gasket faces

helmet shell.

Never use the auto-

darkening lens with-

out the inside and out-

side lens covers prop-

erly installed. Welding

spatter will damage

the

auto-darkening

lens and

warranty.

Front Lens Gasket

Outside Lens Cover

Lens Assembly Gasket

Lens Assembly

Inside Lens Cover

Lens Frame

OM-256 476 Page 18

Be sure wide edge

of gasket faces

helmet shell.

Remove the lens assembly

to remove either lens cover.

To remove the lens assem-

bly, push down on the helmet

bottom retaining arms and

push the retaining clips to-

ward the outside of the hel-

void

the

met. Lift up on the assembly

and pull free of the helmet.

Outside Lens Cover

Remove the outside lens

cover by pushing cover into

the helmet. Remove the rub-

ber lens gasket and install on

the new lens cover. Reinstall

the lens assembly.

Be sure the flat side of

lens cover gasket faces

the helmet shell.

Inside Lens Cover

To replace the inside lens

cover, remove the lens as-

sembly from the lens frame

by pushing up on the top two

retaining tabs while gently

pushing the lens free.

Remove the lens cover by

sliding it out of either side.

Replace with the new cover

lens and reinstall the assem-

bly in the helmet.

Ref. 805 012