Miller Digital Performance Series 매뉴얼 - 페이지 11
{카테고리_이름} Miller Digital Performance Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Digital Performance Series 32 페이지. Auto-darkening helmets
Miller Digital Performance Series에 대해서도 마찬가지입니다: 매뉴얼 (28 페이지), 소유자 매뉴얼 (32 페이지)
![Miller Digital Performance Series 매뉴얼](/uploads/products/server2/3574851/3574851.jpg)
3-4. Variable Shade Control
1
Variable Shade
Adjustment Buttons
2
Mode Control Button
Use the LTR and DKR ad-
justment buttons to adjust
the lens shade in the dark-
ened state. Use the table in
Section 1-4 to select proper
shade control setting based
on your welding process.
The shade ranges for each
mode are as follows:
Weld − No. 8 − No. 13
Cut − No. 5 − No. 8
Digital Elite Lens Shown
1
Grind − No. 3 only
X-Mode − No. 8 − No. 13
Start at the highest setting
and adjust lighter to suit the
application and your person-
al preference.
Variable Shade Adjust-
ment Procedure
S
Press Auto On/Off but-
ton to turn lens On. Hel-
met lens will darken
twice and then clear.
2
S
Press Mode Control
Button to select desired
function:
Weld,
Grind, or X-Mode.
.
Cut mode is not present
on Pro-Hobby helmets.
X-Mode is not present
on Pro-Hobby and Per-
formance helmets.
S
Use LTR and DKR ad-
justment buttons to se-
lect desired shade.
S
Begin welding or contin-
ue with other lens ad-
justments.
OM-256 476 Page 9
Cut,