Miller Elite Quick Release 작동 지침 - 페이지 4
{카테고리_이름} Miller Elite Quick Release에 대한 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Elite Quick Release 32 페이지. Auto-darkening helmets
![Miller Elite Quick Release 작동 지침](/uploads/products/server2/3574870/3574870.jpg)
NOISE can damage hearing.
Noise from some processes or equipment can damage hearing.
D
READ INSTRUCTIONS.
D Read and follow all labels and the Owner's Manual carefully before installing,
D Use only genuine replacement parts from the manufacturer.
D Perform maintenance and service according to the Owner's Manuals, industry standards,
and national, state, and local codes.
FUMES AND GASES can be hazardous.
Welding produces fumes and gases. Breathing these fumes and gases can be
hazardous to your health.
D Keep your head out of the fumes. Do not breathe the fumes.
D If inside, ventilate the area and/or use local forced ventilation at the arc to remove welding
fumes and gases.
D If ventilation is poor, wear an approved air-supplied respirator.
D Read and understand the Material Safety Data Sheets (MSDSs) and the manufacturer's
instructions for metals, consumables, coatings, cleaners, and degreasers.
D Work in a confined space only if it is well ventilated, or while wearing an air-supplied respirator.
Always have a trained watchperson nearby. Welding fumes and gases can displace air and
lower the oxygen level causing injury or death. Be sure the breathing air is safe.
D Do not weld in locations near degreasing, cleaning, or spraying operations. The heat and rays
of the arc can react with vapors to form highly toxic and irritating gases.
D Do not weld on coated metals, such as galvanized, lead, or cadmium plated steel, unless the
coating is removed from the weld area, the area is well ventilated, and while wearing an air-
supplied respirator. The coatings and any metals containing these elements can give off toxic
fumes if welded.
OM-246 377 Page 2
Wear approved ear protection if noise level is high.
operating, or servicing unit. Read the safety information at the beginning of
the manual and in each section.