Miller Elite Quick Release 작동 지침 - 페이지 9

{카테고리_이름} Miller Elite Quick Release에 대한 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Elite Quick Release 32 페이지. Auto-darkening helmets

페이지 인쇄

3-5. Sensitivity Control (Titanium 7300 Series Helmets)

SHADE

Stick Electrode

Short Circuiting (MIG)

Pulsed & Spray (MIG)

Gas Tungsten Arc (TIG)

Plasma Arc Cutting/Welding

SENSITIVITY

DELAY

Recommended Sensitivity Settings

Sensitivity Control

Weld Mode

Use control to make the lens more respon-

sive to different light levels in various weld-

ing processes. Use a Mid-Range or

30−50% sensitivity setting for most ap-

plications.

It may be necessary to adjust helmet sensi-

tivity to accommodate different lighting con-

ditions or if lens is flashing On and Off. Ad-

just helmet sensitivity as follows:

Adjust helmet sensitivity in lighting con-

ditions helmet will be used in.

Turn sensitivity control to lowest set-

ting.

Press Reset button to turn helmet On.

Helmet lens will darken twice and then

clear.

Face the helmet in the direction of use,

exposing it to the surrounding light con-

ditions.

Gradually turn sensitivity setting clock-

wise until the lens darkens, then turn

sensitivity control counterclockwise

until slightly past setting where lens

clears. Helmet is ready for use. Slight

readjustment may be necessary for

certain applications or if lens is flashing

on and off.

Grind Mode

Do not weld in the Grind mode; the lens

will not darken.

To use the Grind mode, turn the Sensitivity

control counterclockwise to the far left posi-

tion (Grind). To resume welding, return the

control to the desired sensitivity setting.

Mid-Range

Low/Mid-Range

Mid-Range

Mid/High-Range

Low/Mid-Range

804 815

OM-246 377 Page 7