Miller Elite Series 작동 지침 - 페이지 20
{카테고리_이름} Miller Elite Series에 대한 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Elite Series 32 페이지. With external grind button auto-darkening helmets
Miller Elite Series에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지), 소유자 매뉴얼 (32 페이지), 소유자 매뉴얼 (32 페이지)
8-2. Replacing Batteries In Titanium 9400 Series Helmets
1
OM-246 377 Page 18
Be sure Positive
(+) side of battery
faces up.
To replace the batteries, re-
move the auto-darkening lens
assembly (see Section 7).
1
Battery Tray
After removing the lens assem-
bly, slide the battery holding
trays out and remove the old
batteries.
Replace with CR2450 lithium
type batteries (2 required) or
equivalent (Miller Part No.
217043).
.
Be sure Positive (+) side of
the battery faces up (to-
ward inside of helmet).
Reinstall the battery trays. To
test battery, press the Reset
button. The lens should flash
dark twice. Reinstall the lens
assembly.
.
Left and right battery trays
are not interchangeable.
The auto−darkening hel-
met will not work if battery
trays are installed on the
wrong sides.
OTOS / 804 847