Miller Elite Series 매뉴얼 - 페이지 11

{카테고리_이름} Miller Elite Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Elite Series 20 페이지. With external grind button auto-darkening helmets
Miller Elite Series에 대해서도 마찬가지입니다: 작동 지침 (32 페이지), 소유자 매뉴얼 (32 페이지), 소유자 매뉴얼 (32 페이지)

Miller Elite Series 매뉴얼
SECTION 6 − REPLACING THE BATTERY
+
To replace the batteries, remove
the
assembly (see Section 5).
1
After removing the lens assembly,
slide the battery holding trays out
and remove the old batteries.
Replace with CR2450 lithium type
batteries (2 required) or equivalent
(Miller Part No. 217043).
.
Reinstall the battery trays. To test,
press the Reset button. The lens
should flash dark twice. Reinstall
the lens assembly.
.
Be sure Positive (+) side
of battery faces up.
+
1
auto-darkening
Battery Tray
Be sure Positive (+) side of the
battery faces up (toward inside
of helmet).
Left and right battery trays are
not
interchangeable.
auto−darkening helmet will not
work if battery trays are
installed on the wrong sides.
OM-217 741 Page 9
lens
The
804 847