Miller T94 Series 소유자 매뉴얼 - 페이지 28
{카테고리_이름} Miller T94 Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller T94 Series 40 페이지. Auto-darkening helmets
Miller T94 Series에 대해서도 마찬가지입니다: 매뉴얼 (32 페이지)
페이지 인쇄
SECTION 10 – MAINTENANCE AND
�
Do not use solvents or abrasive cleaning detergents to clean the helmet. Do not immerse
the lens assembly in water.
�
Keep helmet dry; do not expose helmet to rain or snow. Keep helmet away from fire and oth-
er sources of heat.
�
The auto-darkening lens uses sensitive electronics. Do not drop helmet or handle it in a
rough manner.
The helmet requires little maintenance. However, for best performance clean helmet after each
use. Using a soft cloth dampened with a mild soap and water solution, wipe the cover lenses
clean. Allow to air dry. Occasionally, the filter lens and sensors should be cleaned by gently wiping
with a soft, dry cloth.
Store helmet in a clean, dry, cool place free of solvent-based vapors. To prevent battery from los-
ing power, store helmet in helmet bag or in a dark location. Remove battery(s) if helmet will be
stored longer than six months.
End Of Useful Life
The welding helmet has no expiration date, and with proper care and maintenance it can provide
many years of eye and face protection. The helmet can continue to be used, provided that the hel-
met shell/shroud is undamaged (no cracks, gaps, or holes) and the lens functions normally
(switches from a light state to a dark state.)
OM-255503 Page 26
STORAGE