Miller Titanium 9400 매뉴얼 - 페이지 26

{카테고리_이름} Miller Titanium 9400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Titanium 9400 40 페이지. Auto-darkening w/infotrack

SECTION 8 − INSTALLING OPTIONAL MAGNIFYING LENS

NOTICE − Never use solvents or abrasive cleaning detergents.

NOTICE − Do not immerse the lens assembly in water.

The helmet requires little maintenance. However, for best performance clean after each use. Using

a soft cloth dampened with a mild soap and water solution, wipe the cover lenses clean. Allow to air

dry. Occasionally, the filter lens and sensors should be cleaned by gently wiping with a soft, dry cloth.

OM-256 016 Page 24

SECTION 9 − MAINTENANCE

Optional Magnifying Lens

Starting at the bottom, slide magni-

fying lens into the helmet retaining

brackets. Align the magnifying lens

with the auto-darkening lens as-

sembly.

D Remove lens holding frame

(with auto-darkening lens)

from helmet shell.

D Remove auto-darkening

lens from lens holder.

D Position lens holder so the

magnifying lens holding

tabs are facing toward you.

From the bottom up, slide

magnifying lens into posi-

tion. (Slide magnifying lens

up or down slightly as de-

sired.)

D Reinstall the auto-darkening

lens in the lens holder.

D Reverse procedure to re-

move magnifying lens.

To prevent lens fogging, install

flat side of magnifying lens to-

ward auto-darkening lens.

804 818