Miller Titanium 9400i 매뉴얼 - 페이지 12

{카테고리_이름} Miller Titanium 9400i에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Titanium 9400i 40 페이지. Auto-darkening w/infotrack

3-6. Lens Delay Control (Titanium 7300 And 9400 Series Helmets)

Lens Delay Adjustment

Buttons

Mode Control Button

Use the Lens Delay Short

and Long buttons to adjust

the time for the lens to switch

to the clear state after weld-

ing or cutting.

The delay is particularly use-

ful in eliminating bright af-

ter-rays present in higher

amperage

applications

where the molten puddle re-

mains bright momentarily af-

ter welding. Use the Lens

Delay Control buttons to ad-

just delay from 0 to 10 (0.1 to

1.0 second).

OM-256 016 Page 10

The delay ranges for each

mode are as follows:

Weld, Cut, X Modes − 0 − 10

Grind Mode − No delay ad-

justment

There is no lens delay

adjustment in the Grind

mode.

Lens Delay Adjustment

Procedure

Press Auto On/Off but-

ton to turn helmet On.

Helmet lens will darken

twice and then clear.

Press Mode button to se-

lect desired function:

Weld, Cut, or X-Mode.

Use Short and Long ad-

justment buttons to se-

lect desired delay.

Begin welding or contin-

ue with other lens adjust-

ments.