Miller ICE-27T 소유자 매뉴얼 - 페이지 18

{카테고리_이름} Miller ICE-27T에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller ICE-27T 36 페이지. Air-cooled torches for plasma arc cutting
Miller ICE-27T에 대해서도 마찬가지입니다: 소유자 매뉴얼 (36 페이지), 소유자 매뉴얼 (38 페이지)

페이지 인쇄
Miller ICE-27T 소유자 매뉴얼

4-10. Connecting 1-Phase Input Power For 240 VAC

5
2
8
L2
240 VAC, 1
Tools Needed:
OM-225 216 Page 14
.
A complete Parts List is available at www.MillerWelds.com
1
=GND/PE Earth Ground
7
4
6
L1
1
L2
3
L1
!
Installation
must
meet
National and Local Codes − have
only qualified persons make this
installation.
!
Disconnect and lockout/tagout
input power before connecting
input conductors from unit.
!
Always connect green or green/
yellow
conductor
to
grounding terminal first, and never
to a line terminal.
1
Black And White Input Conductor
(L1 And L2)
2
Green Or Green/Yellow Grounding
Conductor
3
Input Power Cord.
4
Disconnect Device (switch shown in
the OFF position)
5
Disconnect Device Grounding
Terminal
6
Disconnect Device Line Terminals
Connect green or green/yellow grounding
conductor to disconnect device grounding
terminal first.
Connect input conductors L1 and L2 to
disconnect device line terminals.
7
Over-Current Protection
Select type and size of over-current
protection using Section 4-8 (fused
disconnect switch shown).
8
Receptacle (NEMA 6-50R)
Customer Supplied
Close and secure door on disconnect
device. Remove lockout/tagout device,
and place switch in the On position.
803 766-B / Ref. 802 443-A
all
supply