Miller 8813 매뉴얼 - 페이지 16
{카테고리_이름} Miller 8813에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller 8813 24 페이지. Beam anchors
페이지 인쇄V. MAINTENANCE
A. SERVICING
Servicing must only be carried out by a qualified person trained in the inspection and replacement of
the device. A record log of all servicing and inspection dates for this system should be maintained by
the company safety officer. This product and all components must be withdrawn from service if
subjected to fall arresting forces. Only original Miller Equipment replacement parts are approved
for use in this device. Contact your Miller distributor or Dalloz Fall Protection's Customer Service
department at 1-800-873-5242 if you have any questions.
B. CLEANING/STORAGE
Basic care of all Miller safety equipment will prolong the durable life of the unit and will contribute
toward the performance of its vital safety function. Proper storage and maintenance after use are as
important as cleansing the equipment of dirt, corrosives, or contaminants. Storage areas should be
clean, dry and free of exposure to fumes or corrosive elements.
Wipe off all surface dirt with a sponge dampened in plain water. Squeeze the sponge dry. Dip the
sponge in a mild solution of water and commercial soap or detergent. Work up a thick lather, with a
vigorous back and forth motion. Then wipe dry with a clean cloth. Hang freely to dry, but away from
excessive heat, steam, or long periods of sunlight.
Essuyez toute la saleté en surface avec une éponge trempée dans l'eau du robinet. Essorez
l'éponge. Trempez ensuite dans une solution légère de savon ou de détergent commercial. Faites
mousser abondamment en frottant vigoureusement dans les deux sens. Essuyez ensuite avec un
chiffon propre. Pendez pour le séchage en évitant les chaleurs trop fortes, la vapeur et les
longues périodes d'exposition au soleil.
Frote toda la suciedad de la superficie con una esponja mojada en agua. Exprima la esponja hasta
secarla. Sumerja la esponja en una solución suave de agua y jabón o detergente comercial. Obtenga
una espuma espesa con un movimiento vigoroso de vaivén. A continuación frote hasta que esté seco
con un trapo limpio. Cuelgue para secar, pero alejado del calor excesivo, vapor o largos períodos de
luz del sol.
16