AquaOne HJ-311 사용 설명서 - 페이지 8
{카테고리_이름} AquaOne HJ-311에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaOne HJ-311 10 페이지.
페이지 인쇄The user is responsible for complying with local safety and mounting
regulations. Ask an elec- trician, if necessary.
The user must take appropriate measures (e.g., installation of an alarm
system, a reserve pump, etc.) to prevent damage caused by the flooding in
case of device malfunctioning.
In case of device failure, repairs can only be carried out by an electrician.
The device must never run dry or be operated with its suction line fully
closed.
Do not use this device to operate swimming pools.
This device must not be integrated into any kind of domestic water circuit
meant for potable water.
Resistance
The maximum temperature of the pumped liquid should not exceed +35 ℃
in continuous oper- ation.
The transport of aggressive fluids (acids, bases, etc.) as well as of abrasive
substances (for
example sand) must be avoided.
Electrical connection
The electrical connection is made to an earthed socket 230 V ~ 50 Hz.
Fuse min. 6 A.
The motor is protected from overcharge and blockage with the help of the
built-in thermal motor protection. When overheated, the pump motor is
automatically switched off by the thermal pro- tection; after cooling down,
the pump automatically re-starts.
Mains connection
The pond pump that you have purchased is already equipped with a
protection plug. The pump is meant to be connected to a 220/230 V~50 Hz
safety socket. Make sure that the socket is sufficiently protected (min. 6 A)
and fully functional. Plug in the plug, the pump is operational
Installation
Place the pump beneath the water
surface,making sure that no water can
penetrate the socket.
By Aquaristikwelt24
www.aquaristikwelt24.de
.
8 |
e
S e i t