3B SCIENTIFIC BE5 사용 설명서 - 페이지 2

{카테고리_이름} 3B SCIENTIFIC BE5에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3B SCIENTIFIC BE5 4 페이지. Monocular/binocular/trinocular microscope

페이지 인쇄

Art. No.

Description

Stand

Tube

Eyepieces

Objectives

Enlargement

Object Stage

Illumination

Condenser

Dimensions

Weight

2. Unpacking and assembly

The microscope is packed in a molded

styrofoam container.



Take the container out of the carton remove

the tape and carefully lift the top half off the

container. Be careful not to let the optical

items (objectives and eyepieces) drop down.



To avoid condensation on the optical com-

ponents, leave the microscope in the original

packing to allow it to adjust to room temper-

ature.



Using both hands (one around the pillar and

one around the base), lift the microscope

from the container and put it on a stable

desk.



The objectives will be found within individual

protective vials. Install the objectives into the

microscope nosepiece from the lowest mag-

nification to the highest, in a clockwise direc-

tion from the rear.



Insert the eyepiece into the tube and secure

it in place using the small hex key.



Secure the head with the large hex key.

1020249

Monocular

Micro-

scope ME5

Robust, all metal stand with arm permanently connected to the base. Fo-

cussing by means of separate knobs for coarse and fine adjustment located

on either side of the stand and operated by rack and pinion drive with ball

bearings and retaining lever, adjustable stopper for protecting the object

slides and objective.

Resolution of fine focussing adjustment: 0.002 mm

Monocular inclined 30°,

head rotation 360°

Wide field plan eye-

piece PL 10x 18 mm

Inverted objective revolver with 4 achromatic objectives 4x / 0.10, 10x / 0.25,

40x / 0.65, 100x / 1.25 (oil)

40x, 100x, 400x, 1000x

x-y mechanical stage, 132 mm x 140 mm, with object guide and coaxial

adjustment knobs perpendicular to the object stage, adjustment range 76

mm x 50 mm, accuracy 0.1 mm

Adjustable LED lighting integrated in base, universal 100 to 240 V, 50/60 Hz

power supply

Abbe condenser N.A.1.25 with iris diaphragm , filter holder and blue filter

350 mm x 213 mm x 366 mm approx.

8 kg approx.

1020250

Binocular

Micro-

scope BE5

Monocular inclined 30°,

head rotation 360°

Wide field plan eyepiece PL 10x 18 mm

3. Operation

3.1 General information



Set the microscope on a level table.



Place the object to be observed in the center

of the object plate.



Connect the mains cable to the net and turn

on the switch to get the object illuminated.



Make certain that the specimen is centered

over the opening in the stage.



Make the necessary eyepiece dioptre ad-

justments to suit your eyes (refer to 3.2).



Adjust the interpupillary distance so that one

circle of light can be seen (refer to 3.3).



Adjust the aperture of the iris diaphragm to

get the background brightness suitable for a

high contrast image.



Rotate the nosepiece until the objective with

the lowest magnification is pointed at the

specimen. There is a definite "click" when

each objective is lined up properly.

NOTE: It is best to begin with the lowest power

objective. This is important to reveal general

structural details with the largest field of view

first. Than you may increase the magnification

as needed to reveal small details.

1020251

Trinocular

Micro-

scope TE5

Monocular inclined 30°,

head rotation 360°