Burkert 8200 Series 사용 설명서 - 페이지 9

{카테고리_이름} Burkert 8200 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Burkert 8200 Series 16 페이지. Probe holder

Installation,commissioning

insTAllATion,

commissioning

6.1.

Danger

risk of injury due to high pressure in the installation.

▶ Stop the circulation of medium, cut-off the pressure and drain

the pipe before loosening the process connections.

risk of injury due to high medium temperatures.

▶ Use safety gloves to handle the holder.

▶ Stop the circulation of medium and drain the pipe before loos-

ening the process connections.

risk of injury due to the nature of the medium.

▶ Respect the prevailing regulations on accident prevention and

safety relating to the use of hazardous products.

Warning

risk of injury if the holder is not tight.

▶ Make sure that a probe is inserted in every hole to ensure the

tightness of the holder.

Type 8200

Warning

risk of injury due to nonconforming installation.

▶ Installation can only be carried out by qualified and authorised

personnel with the appropriate tools.

▶ Observe the installation instructions for the measuring device

inserted into the holder.

risk of injury due to an uncontrolled restart.

▶ Ensure that the restart of the installation is controlled after any

interventions on it.

Warning

Danger due to nonconforming commissioning.

Nonconforming commissioning may lead to injuries and damage

the holder and its surroundings.

▶ Before commissioning, make sure that the staff in charge

have read and fully understood the contents of the Operating

Instructions.

▶ In particular, observe the safety recommendations and intended

use.

▶ The installation must only be commissioned by suitably trained

staff.

English