AquaOne CF-700S 사용 설명서 - 페이지 8

{카테고리_이름} AquaOne CF-700S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaOne CF-700S 11 페이지. Internal filter
AquaOne CF-700S에 대해서도 마찬가지입니다: 사용 설명서 (7 페이지)

Placing in service

1. Read and familiarize yourself with the safety instructions before placing

in service.

2.Compare the line voltage(V) and frequency (HZ) of your electrical circuit

with the data on the model plate. These data must agree.

3.Attention after installing, adjust the tightness of cover to change the

fountain style.

4.Comply with the maximum permitted immersion depth (see the

information on the model plate).

5.Do not place the pump directly in the pond floor mud, place the pump on

a raised surface.

6.Lay the power cord in a protected manner to exclude the possibility, of

damage.

7.Connect the pump to the electrical circuit.

8.The flow rate can be adjusted by the control valve; the pump will start

work once plug in and stop once unplug.

lmportant note

Never operate the pump without the filter basket. The filter basket protects

the pump from coarse dirt that can lead to plugging up the pump.

Never operate the pump without water (dry run). The pump bearing will be

destroyed.

Additional installation instructions

1. Our specified outputs are always measured directly at the pump outlet

(without hose connection and accessories).

2. To achieve the highest possible pump output, keep the hose connections

as short as possible. Elbows, angles and other connecting elements

should be reduced to a minimum, as they lessen the pump output.

3. Because of the different product models, equipped with different outlets.

Part products are equipped with stepped water outlets. To avoid flow

lass, the unused water outlet connectors should be sawed off at the

corresponding positions on the stepped hose.

www.aquaristikwelt24.de

| 8

S e i t e

By Aquaristikwelt24