ABB FBIP-21 BACnet/IP 빠른 설치 및 시작 매뉴얼 - 페이지 2
{카테고리_이름} ABB FBIP-21 BACnet/IP에 대한 빠른 설치 및 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB FBIP-21 BACnet/IP 2 페이지. Bacnet/ip adapter module
ABB FBIP-21 BACnet/IP에 대해서도 마찬가지입니다: 빠른 설치 및 시작 매뉴얼 (2 페이지)
페이지 인쇄Start-up
When the module is connected to the drive, the drive control program sets the applicable parameters.
See the appropriate drive manual.
Basic parameter settings
Index
Name
20.01
Ext1 commands
22.11
Speed ref1 source
28.11
Frequency ref1 source
50.01
FBA A enable
50.02
FBA A comm loss func
51.04
IP configuration
51.05...08
IP address
51.09
Subnet CIDR
51.14
Device obj ID lo
51.15
Device obj ID hi
To take the settings into use, validate and refresh the parameters with parameter 51.27 FBA par refresh.
Further information
See the latest version of FBIP-21 BACnet/IP adapter
module user's manual (3AXD50000028468 [English]) in
ABB library (www.abb.com/drives/documents)
FBIP-21 manual
3AXD50000158171 Rev A (EN) 2017-11-23
Value
Fieldbus A
FBA A ref 1
FBA A ref 1
Enable (or select the option slot in which the module is installed).
This activates the communication module. The HOST LED becomes green.
Fault
Set the IP address according your network configuration.
Set a unique device object instance value for BACnet devices.
For more information on fieldbus options and protocols
provided by ABB Drives, see the fieldbus
communications web page
.
(new.abb.com/drives/connectivity/fieldbus-connectivity).
Fieldbus communications web page