AquaOne HW 704 사용 설명서 - 페이지 11

{카테고리_이름} AquaOne HW 704에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaOne HW 704 15 페이지. Outsidefilter

Operation gide

1. Take out the inlet&outlet taps from the accessories box, as shown in

pic 1, pull up the small handle to place-1, then push the inlet&outlet taps to

the filter head-2, fasten using the small handle-3.

2. As shown in pic 2, to sei your filter up, the four buckles should be

unclamped from the main body, then separate the head from the base of the

filter.

3. Add the filter materials as you like, the pic 3 is for your reference.

4. lnsert the UV bulb and quartz tube to the right place, as shown in the

pic 4, then fasten the filter head to the base of the filter.

5. When the barrel is separated by the cover, the protect switch will be oft

then the UV will be extinguish to avoid the damage to body, so please take

care of the place of switch, as shown in pic 5 (only for B Series).

6. Repeat the step 2 refasten the filter head to the base of filter. Fix the

inlet and outlet assembly (Please refer to the parts list) to the tank according

to pic 10, and tighten the screws on the fixing base.

7. The small handle between the inlet&outlet taps is the shut of valve.

8. As shown in pic 8, press down the primer button on top of the filter

head, this will prime this filter drawing water in through the hose, repeat this

if necessary until all pipework is full of water.

9. The UVC lamp must be replaced alter 8,000 hours of operation in order

to ensure that the filter UVC continues to operate with optimum effectiveness

(only for B Series).

By Aquaristikwelt24

www.aquaristikwelt24.de

11 |

S e i t