Aquapeutics Mazatlan 설치 매뉴얼 - 페이지 9

{카테고리_이름} Aquapeutics Mazatlan에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aquapeutics Mazatlan 15 페이지.

Step 6

Lift the fixed glass frame onto the bathtub as shown; slide it into the aluminum extrusion of the

left side panel. When it has bottomed out into the vertical extrusion and the bottom of the glass

panel is lying flat on the tub-lip surface as shown, attach with two 3/16 x 5/8 inch self-tapping

screws from the side as shown. (Two people are recommended for this procedure. One to hold

the pieces in place while the other screws the panel in place.)

Step 7

Lift the fixed glass frame onto the bathtub as shown in photo; slide it into the aluminum

extrusion of the right side panel. When it has bottomed out into the vertical extrusion and the

bottom of the glass panel is lying flat on the tub-lip surface as shown, drill two 1/16 inch pilot

holes. After you have inserted the middle glass frame with the sliding glass door and the

alignment has been checked to be square and plumb, attach with two 3/16 x 5/8 inch self-

tapping screws from the side as shown. (Two people are recommended for this procedure.

One to hold the pieces in place while the other drills and screws the panel in place.)

3/16 x5/8

Screws

Drill 1/16"

pilot holes

first

3/16 x5/8

Screws

Drill 1/16"

pilot holes

first