AQUAPHOR C126 사용 설명서 - 페이지 2

{카테고리_이름} AQUAPHOR C126에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AQUAPHOR C126 4 페이지. Three way kitchen faucet

페이지 인쇄

Technical Specifications

Maximum water pressure

Cold water temperature

Hot water temperature

Temperature of filtered water

Faucet assembly Weight

Included in content

Faucet assembly

Flexible connection hoses for cold

and hot water (27), L = 600 mm, G1/2 "

Flexible connection hose for purified water (28), L = 370 mm, G3/8 "

Threaded rod (23)

Screw nut (24)

Gasket (25)

Shaped collar (26)

Adapter for tube JG 1/4 "

Manual

Package

Installation

Please read these instructions before attempting to install the faucet.

1. Drill a hole in the sink (countertop) diameter of 35 mm.

2. Screw the flexible hoses into the holes (3 pcs.), located at the bottom of the faucet

body (12), guided by the colour designation liner and instructions in Figure 2. To

connect Water purifiers that use tube JG 1/4 ", use an adapter (included).

3. Screw threaded rod (23) to the internal thread of the faucet body (12).

4. Insert hoses and then the threaded rod (23) in the aperture of the kitchen sink.

5. From the bottom of the sink put on the gasket (25) and shaped collar (26) on

a threaded rod and screw on the screw nut (24).

6. Place the faucet in a comfortable position and tighten the screw nut (24) to the

end.

Hole for connection

of purified water

flexible hose

Figure 2. Flexible hoses and threaded rod connecting

Hole for threaded rod

0.63 MPa

+4...+ 38 °C

4...+ 38 °C

Hole for connection of hot water

flexible hose (colour – red)

Hole for connection of cold water

flexible hose (colour – blue)

to 75 °C

2.01 kg

1 pc.

2 pcs.

1 pc.