AQUAPHOR DWM-31 사용 설명서 - 페이지 8
{카테고리_이름} AQUAPHOR DWM-31에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AQUAPHOR DWM-31 17 페이지. Drinking water machine
페이지 인쇄
7. Operation of the DWM
When connecting the tip to the collection bowl, water starts flowing.
After the water is filled and the float is risen up, the tip is automatically disconnected.
If you want to stop the filling of water into the bowl ahead of schedule, just press the button located on the
top of the bowl cover.
Return the nose into the cradle not later than 1 hour after the start of filling the collection bowl with water.
ATTENTION! For proper operation of the DWM, it is not allowed to create tension of the tube while filling
the collection bowl with water.
Fig. 11 and 11b show the correct and incorrect placement of the tube and the collection bowl during filling
with water.
At the wrong positioning of the tube, the tip's automatic shut-off system may be denied, in the result of
which spillage is possible.
Removing the cover of the collection bowl (Fig. 12a, 12b)
•
Pull the front of the cover
(in the nozzle) upward to
form the small gap between
the cover and the machine
as shown in (Fig. 12a).
Press down your thumb on
•
the back of the cover until it
moves forward, as shown in
(Fig. 12b).
ATTENTION! Do not drop the bowl.
Shutoff device operation
•
Put the shutoff all the way into the neck of the bowl (e.g. bottle, Fig. 13a), or a vessel wall (e.g. pot, Fig.
13b).
•
Make sure that the shutoff is securely latched (Fig. 14a, 14b).
•
Insert the tip into the hole of the shutoff (Fig. 14a).
•
Wait for filling the bowl with clean water before the automatic shutting off of the water supply and
disconnecting the tip.
•
Disconnect the shutoff from the bowl.
•
If you want to stop filling the bowl ahead the schedule, click on the button at the end of the shutoff (Fig.
14b).
Figure 12a
8
Figure 12b
Figure 14a
Figure 11a
Figure 13a
Figure 14b
Figure 11b
Figure 13b