AQUAPHOR RO-102S 소유자 매뉴얼 - 페이지 6
{카테고리_이름} AQUAPHOR RO-102S에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AQUAPHOR RO-102S 20 페이지. Reverse osmosis system
AQUAPHOR RO-102S에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지)
페이지 인쇄
3. Product assembly, Cont.
During transportation, the component parts are located under the top lid. To
open the lid, please turn the three plastic latch screws on the cover 90 degrees
counterclockwise (figure 2).
4. RO design and operation principles
6
RO housing (1) consists of an upper plate, with four collectors fixed onto it, to place the replacement
cartridges and the RO-hydro automatic unit RO. The upper lid comes with a decorative cover, fixed in
place with three plastic latches. An integral part of the RO housing is the treated water storage tank (6).
Treated water goes into the storage tank upon exiting the membrane cartridge. This storage tank ensures
availability of the required amount of filtered water always.
6
Figure 3. RO main components
1 – RO housing assembly;
2, 3 – Preliminary water treatment block;
4 – Reverse Osmosis membrane block;
5 – Water conditioning block;
6 – Storage tank
Figure 2. How to
open the top lid
AQUAPHOR RO-101S, RO-102S