AQUAPHOR RO-102S 소유자 매뉴얼 - 페이지 7
{카테고리_이름} AQUAPHOR RO-102S에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AQUAPHOR RO-102S 16 페이지. Reverse osmosis system
AQUAPHOR RO-102S에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지)
페이지 인쇄
Incoming
tap water
Reverse
Osmosis
membrane
Treated water
When the clean water faucet is opened, water
from the mains enters the technical chamber
via the shutoff valve and forces treated water
from the storage chamber through the faucet
Picture 4. RO installation scheme
Incoming tap
water JG
tube 3/8"
Treated water
JG tube 1/4"
Pressure
via the conditioning block. The automatic check
valve then triggers and opens water supply to
the RO-storage tank.
5. RO installation
ATTENTION!
plumber who is certified to perform the instal-
lation in accordance with state law.
Locate the appropriate installation place for the
faucet and RO. Take care to ensure that the de-
livery tubes are pulled freely, without over bend-
ing. RO must be installed on a flat, even solid
surface as installation on an uneven surface may
cause vibration or noise. Additionally, RO must
be located away from heat sources, such as
kitchen ovens, hot water supply pipes, dishwash-
ers or washing machines, or at least isolated
from such heat sources.
RO housing
Drain water
JG tube 1/4"
Water flow direction
Only install your RO by a qualified
Clean water
faucet
Connection node,
shuto valve
in open position
Kitchen
faucet
Cold water
supply
Drain saddle
7