AQUAPHOR RO-206S 운영 매뉴얼 - 페이지 2

{카테고리_이름} AQUAPHOR RO-206S에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AQUAPHOR RO-206S 17 페이지. Reverse osmosis system

페이지 인쇄

1. Specification Data

1. Introduction

RO-206S Reverse Osmosis System (hereinafter referred

to as RO-206S) is manufactured by Westaqua-Invest

OÜ (Estonia).

RO-206S is intended to purge of mechanical and

colloidal particles, organic impurities and to remove

foreign flavour, odour and colour when post-treating cold

drinking water supplied via municipal and local water

supply networks (water from artesian boreholes, wells,

etc.) to meet the requirements, specified in this Manual.

RO-206S works on the principle of transferring water

molecules through a semipermeable membrane by

applying overbalanced osmotic pressure. This pressure

increases with increasing water salinity, so the higher

the water salinity, the greater water supply pressure is

required to keep RO-206S operating.

RO-206S is made of safe, non-toxic materials ensuring

that no substances hazardous to both human health and

the environment are released into the water. RO-206S

meets EC hygiene requirements.

2. Specification Data

Overall dimensions (length × height × width):

Water supply pressure, min

Water supply pressure, max

Filtered water temperature

Reverse osmosis membrane maximum efficiency rate

(at +25 °C and 0.4 MPa)

Treated/drained water ratio (at a water temperature not lower than 20 °C)

Weight, not more than

Membrane

cartridge

Membrane

cartridge

Fig. 1

K1 K1

Dirty water

Membrane

Treated water

411 × 486 × 195 mm

90 kPa

0.63 MPa

+ 5 to + 38 °С

47.2 l/h

(for 2 membrane cartridges)

1:2–1:4

12 kg

Pressure