AQUAPHOR S800 P1 운영 매뉴얼 - 페이지 4
{카테고리_이름} AQUAPHOR S800 P1에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AQUAPHOR S800 P1 20 페이지.
페이지 인쇄
Source water requirements
Source water requirements
Water hardness, mg-eq / l*
Content of divalent iron, mg/l*
Content of ferric iron, mg/l
Manganese content, mg/l*
рН
Temperature, °C
Content of oil products, mg/l
Hydrogen sulfide, mg/l
Permanganate oxidizability, mgО2/l
Silicon, mg/l
*
The total "iron + hardness + manganese", in terms of calcium carbonate, should not exceed the maximum compensated hardness
indicated in the "Technical characteristics" table.
ATTENTION! The softener does not purify water from colloidal iron or iron contained in organic complexes.
Softener delivery set
1.
Complete softener
2.
Overflow fitting
3.
Drainage tube D=16 mm (5/8"), L=2.5 m
4.
Flexible hose 1" by 3/4" (3/4" by 3/4") with o-rings
5.
Power supply 12 VAC
6.
Controller
7.
Drain pipe 1/2"
For Owner's Reference
Aquaphor Softener Model
Serial #
Date of Installation:
Hardness:
Iron:
pH:
Water Pressure:
Water Temperature:
4
Softener S800
no more than 28
no more than 12
no more than 0.3
no more than 3
from +5 to +38
no more than 1
no more than 0.03
no more than 5
no more than 10
1 pc.
1 pc.
1 pc.
2 pcs.
1 pc.
1 pc.
1 pc.
Softener S800 P1
6 to 9
no more than 1