Burks GV Series 설치 및 운영 매뉴얼
{카테고리_이름} Burks GV Series에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Burks GV Series 6 페이지. Condensate return systems
페이지 인쇄INSTALLATION AND OPERATION MANUAL
Condensate Return Systems - Series: GV
The receiver tank is NOT a pressure vessel. It MUST be vented to atmoshere to prevent pressure buildup. Any
internal pressure other than that due to the weight of fl uid in the tank IS UNSAFE - Warranty is void if receiver
tank is pressurized.
IMPORTANT!
Read all instructions in this manual before operating pump.
DO NOT work on pump until you are sure pump and associated piping are totally depressurized,
pump and motor have cooled down, and electricity to the motor has been shut off and locked out.
As a result of Crane Pumps & Systems, Inc., constant product improvement program, product
changes may occur. As such Crane Pumps & Systems reserves the right to change product
without prior written notifi cation.
A Crane Co. Company
420 Third Street
Piqua, Ohio 45356
Phone: (937) 778-8947
Fax: (937) 773-7157
www.cranepumps.com
Manual Index
WARNING!
83 West Drive, Bramton
Ontario, Canada L6T 2J6
Phone: (905) 457-6223
Fax: (905) 457-2650
Form No. F0925D-Rev. F